Once you have finished creating your Tinkercad and it is ready to print you will need to export your file.
In the top right corner, you should see these options.
You need to click Export. Once you click export you should have these options show up.
From here you need to click download as a .STL file.
Load up UpStudio. Once you have opened UpStudio you should see this.
You will see some options on the Left side of your screen you will need to click the option on the bottom left of the screen and preheat your printer.
Once you have done this you are going to need to click the + icon and you should see something like this come up (without the lines and labels).
From here you need to click the insert 3d model option and insert your .STL file you saved before on Tinkercad then you are pretty much ready to print.
I will leave a link to a video for more in depth instructions if you would like them.
No comments:
Post a Comment
To support my learning I ask you to comment as follows:
1. Something positive - something you like about what I have shared.
2. Thoughtful - A sentence to let us know you actually read/watched or listened to what I had to say
3. Something thoughtful - how have you connected with my learning? Give me some ideas for next time or ask me a question.
Note: only a member of this blog may post a comment.